User Instructions - Samsung PPM42H3 Owner's Instructions Manual

User Instructions

Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma display panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as "screen burn". To avoid such image retention, reduce the degree of
brightness and contrast of this screen when displaying a still image.
Cell Defect
The plasma display panel consists of fine cells. Although the panels are produced with more than
99.9 percent active cells, there may be some cells that do not produce light or remain lit.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height and do not install and operate there.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Checking Parts
Owner's Instructions
1 Install CD
MDC Software (RS232C)
The PPM42H3 model uses the same MDC program CD used for PPM50H3/PPM63H3 models.
Power Cord
Remote Control/
AAA Batteries
Ferrite Cores for
PC Cable
Speaker Wire
(2EA)
Speaker Wires Stand-Base
(2EA) (2EA)
Screws
MDC Cable (4EA)
(RS232C)
3
ENG