Selecting The Picture Size; Activating/Deactivating The Digital Noise Reduction Feature - Samsung PPM42H3 Owner's Instructions Manual

Selecting the Picture Size

You can select the picture size which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result: The options available in the Picture group are
displayed.
2 Press the √ button.
button to select Size. Press the √ button.
3
Press the or
Select the option by pressing the œ or √ button.
4
Result: The following modes are available depending on the
input source.
Wide - Zoom1 - Zoom2 - 14:9 - Normal
Wide - Panorama (Video or S-Video Mode) -
Zoom1 - Zoom2 - 14:9 - Normal
Wide - Normal
(PC or DVI Mode)
You can also set these options simply by pressing the
P.SIZE button.

Activating/Deactivating the Digital Noise Reduction Feature

If the signal received by your PDP is weak, you can activate this
feature to reduce any static and ghosting that may appear on the
screen.
1
Press the MENU button.
Result: The options available in the Picture group are
displayed.
2 Press the √ button.
3
Press the or button to select Digital NR.
Press the œ or √ button to change the setting (On or Off).
4
The lifting is available in the Zoom1, Zoom2 or
14:9 mode by pressing the † or ... button.
Picture
œ œ Dynamic √ √
Mode
√ √
Adjust
œ œ Normal √ √
Color Tone
Size Wide
œ œ Off √ √
Digital NR
Move Sel. Return
Size
Wide
œ œ √ √ Sel.
Store
Picture
œ œ Dynamic √ √
Mode
√ √
Adjust
œ œ Normal √ √
Color Tone
Size Wide
œ œ Off √ √
Digital NR
Move Sel. Return
19
ENG