Important Safety Instructions - Singer 6180 Operation And Safety Notes

Sewing Machine
Important safety
instructions
You should always observe the basic safety instruc-
tions when you use the machine. Read all the
instructions attentively before you use the machine.
ATTENTION!
To prevent electric shocks:
Never leave the machine unattended while it is
connected to the power supply. Remove the
mains plug from the socket after every use as
well as before cleaning the machine.
CAUTION! The mains voltage (voltage of the
socket connection) must comply with the volt-
age of the motor.
The machine may only be used for the purpo-
ses described in this handbook. Only use the
accessories which are recommended by the
manufacturer in these instructions for use.
Disconnect the plug from the socket or switch
off the machine to do any work in the region of
the needle such as threading the needle, or
hook or to the needle, needle plates, or chang-
ing the presser foot.
Disconnect the plug of the sewing machine
from the socket to remove covers, for lubrication
or other maintenance work, which are described
in these instructions and are carried out by the
user.
It is prohibited to make adjustments to the mo-
tor belt yourself. You must contact the service
representative if such adjustments are necessary.
Do not pull the mains plug by grasping the
lead, pull the plug out of the socket.
Handle the foot control carefully and do not let
it fall to the ground. In particular, no objects
may be placed on the foot control.
Always use the correct needle plate. The
wrong needle plate can cause the needle to
break.
Do not use bent needles.
8 GB/IE
113223_Naehmaschine_Singer_Content_BE.indd 8
Keep your fingers away from any moving parts
while sewing. Special caution is required in the
vicinity of the needle of the sewing machine.
Do not pull or push the sewn fabric while you
are sewing. This can bend or break the needle.
Only lift or carry the machine using the handle.
The machine may not be operated if the lead
or mains plug is damaged, the machine is not
operating properly, has fallen to the floor or
has become damaged or wet. If an overhaul
or repair work is necessary or electrical or me-
chanical adjustments are required, bring the
machine to your next contractual retailer or to
the customer service.
The machine may not be operated if venting
ports are sealed. Keep the venting ports of the
machine and foot control free from fluff, dust
and loose tissue.
Do not allow any objects to fall into the ope-
nings of the machine.
Do not operate the machine outdoors.
The machine may not be operated in locations
where aerosol sprays or pure oxygen are used.
The machine may not be used as a toy. Maxi-
mum attention is called for if the machine is
being operated in the presence of children.
Do not expose the machine or the machine
case to direct sunlight or to an extremely hot or
humid room climate.
Do not touch the machine or foot control with
wet hands, wet cloths or other wet objects.
Do not connect the mains plug to a multiple so-
cket to which several leads of other appliances
are connected.
Only use the machine on a level and stable
table.
Prior to every start-up, close the free-arm and
hook cavity cover of the machine.
Keep the sewing feet and needles out of reach
of children.
Do not take the machine apart or change it
yourself.
Ensure than the main switch is switched off and
the mains plug is disconnected from the socket
before you carry out any maintenance of the
machine.
09.02.15 12:01