Changing The Preset Station Table - Samsung CHT-2010 Instruction Manual

VCR
Language
Install
User Set
GB
Auto Power Off
Screen Messages
Auto Setup
Manual Setup
TV System
VCR Output CH
TV STATION TABLE
PR
1
2
3
4
5
DELETE : CLEAR
TV STATION TABLE
PR
1
2
3
4
5
DELETE : CLEAR
22

Changing the Preset Station Table

: English
: Off
: On
Install
: G
: CH 36
CH NAME
021 - - - -
SWAPPING : OK
RETURN
CH NAME
021 - - - -
SWAPPING : OK
RETURN
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3 Press the OK or ❿ buttons to select this option.
Result: The Install
4
Press the corresponding
option is selected.
Setup
5 Press the OK or ❿ button to select this option.
Result: The TV STATION TABLE
6
Press the corresponding
preset TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7
To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8
Press the or buttons to select required position.
❷
And then press OK again to swap the position.
9
On completion, press the RETURN button four times to exit the
menu.
, buttons to select the Install
❷
menu is displayed.
or buttons, until the
❷
menu is displayed.
or buttons, until the required
❷
Manual