Polaris 600 RUSH 2013 Owner's Manual For Maintenance And Safety page 60

THE PERFECT FIT
Handlebar Adjustments
Handlebar Position
1. Loosen the four bolts on
the bottom of the adjuster
block. If necessary, pry the
blocks apart with a screw-
driver.
2. Adjust the handlebar for-
ward or rearward to the
desired position.
3. Tighten the bolts. Torque
the bolts to 13-16 ft. lbs.
(18-22 Nm).
Handlebar Angle
1. Loosen the four bolts on
the top of the adjuster
block. If necessary, pry the
blocks apart with a screw-
driver.
2. Adjust the handlebar for-
ward or rearward to the
desired angle.
3. Tighten the bolts. Torque the bolts to 13-16 ft. lbs. (18-22 Nm).
56
Loosen top bolts to adjust
handlebar angle
Loosen bottom bolts to
adjust handlebar position