Original Accessories/Auxiliary Equipment; Information On Saw Blades; Before Use; Charging The Battery Pack (See Fig . A) - Parkside PSTDA 20-Li A2 Translation Of The Original Instructions

Original accessories/auxiliary
equipment
Use only the accessories and additional
■
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.

Information on saw blades

The Parkside basic equipment includes saw blades
for use with wood and metal .
▯ 2 saw blades for general wood cutting
▯ 1 saw blade for light metals up to 5 mm
NOTE
► You can use any saw blade, provided it is
fitted with a suitable mounting (single-lug
shank) .
Saw blade type
suitable
■ 6 │ GB │ IE │ NI

Before use

Charging the battery pack (see fig . A)

♦
unsuitable
♦
♦
♦
♦
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The storage climate
should be cool and dry and the ambient
temperature should be between 0°C and
50°C .
Connect the battery pack
battery charger (see fig . A) .
Insert the power plug into the socket . The control
LED lights up red .
The green LED indicates that the charging
process is complete and the battery pack
is ready .
CAUTION!
♦ If the red control LED
that the battery pack
cannot be charged .
♦ If the red and green control LEDs
flash, this means that the battery pack
broken .
Push the battery pack
ance .
Switch off the charger for at least 15 minutes
between successive charging sessions .
To do this, disconnect the power plug .
to the high-speed
flashes, this means
has overheated and
both
is
back into the appli-
PSTDA 20-Li A2