Table of Contents
Advertisement
EN
aid of the feed hopper included in the scope of supply (Fig. 1, 17). Screw the container
tightly onto the spray gun.
•
Connect the front part with the rear part of the gun (Fig. 3).
•
Insert battery.
Check that the battery is securely and firmly inserted.
A battery that becomes detached during operation
can cause damage to property or personal injury.
•
Switch the unit on (Pos. I) using the ON/OFF switch (fig. 4, 1).
•
Adjust the spray setting on the spray gun.
The enclosed practice poster is ideal for familiarising yourself with
The enclosed practice poster is ideal for familiarising yourself with
i
operation of the spray gun.
operation of the spray gun. After trying out the first spray coatings, it
makes sense to test it further on cardboard or a similar surface in order
makes sense to test it further on cardboard or a similar surface in order
to find out the right flow rate of paint and air for the best spray pattern.
to find out the right flow rate of paint and air for the best spray pattern.
Detailed information about these settings can be found in chapter 11-15.
Detailed information about these settings can be found in chapter 11-15.
11. Selecting the Spray Setting
(Wall Extra I-Spray spray attachment)
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
2 different spray jet shapes can be set by turning the air cap (fig. 5, 1)
Tighten the union nut (Fig. 5, 2) fully so that no paint is able to penetrate
the device. Check regularly whether the union nut has worked loose during
operation.
Fig. 6 A = vertical flat jet
Fig. 6 B = horizontal flat jet
Use the red adjustment lever to also switch between a wide
( ) and a narrow (
12. Selecting the Spray Setting
(Standard spray attachment)
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
With the union nut (fig. 7, 1) slightly unscrewed, turn the air cap (2) to the desired
spraysetting position (arrow). Then tighten the union nut.
18
After trying out the first spray coatings, it
for horizontal surfaces
for vertical surfaces
) spray jet.
W 600 Flexio 18V
Advertisement
Table of Contents
