Honeywell NOTIFIER UDS-3 User Manual, Installing And Operating Manual page 34

Flowchart of conditions that activate output dedicated to signalling and
release
Pre-activated condition is
bypassed if release condition
is commanded by manual
activation device.
If release is not immediate because a
pre-release time is set or emergency
extension device is active, output will
have a pulsing activation
PAGE - 33
NOTIFIER ITALIA
To state that release was ok, signals
coming from flowmeter and manostat
are controlled (see p. 32)
Installation and operating manual
Doc. M-205.1-UDS3N-ENG Rev A.1
One input in
alarm zone
Two inputs in the
same alarm zone
UDS-3
UDS-3_manu