Page 1
IP64 (IEC529) List of Models Type Bags Embossed tape (see note) Without ground terminal B3SN-3012 B3SN-3012P With ground terminal B3SN-3112 B3SN-3112P Note: Switches on embossed tape must be ordered in units of 3,000 pieces. For details on packing, refer to Switch Pacing on page 17.
Page 2
B3SN B3SN Engineering Data Operating Force vs. Stroke (Typical) 1.96 {200} 1.47 {150} 0.98 {100} 0.49 {50} Stroke S (mm) Nomenclature Film Plunger Push button Contact dome Cover Fixed contact Terminals Base...
Page 3
2. No terminal numbers are indicated on the Switches. The numbers used for terminals in the following graphics are indicated in the “Bottom View” diagram below. In this diagram, the Switch is rotated so that the terminals are on the right and left-hand sides, and the OMRON logo appears the right way up. (Bottom View)
Page 4
B3SN B3SN Do not apply additional force to the plunger once it has stopped 2. When using ultrasonic cleaning in two- or three-tank moving. systems, do not clean for more than one minute at a time or for more than three minutes total. Do not repeatedly press the plunger off-center or from an acute angle.