Table of Contents
Advertisement
Serial Number and Digital Documentation Portal QR Code
3
5
7
9
Serial Number and Digital Documentation Portal QR Code
The pullout asset card on the front panel of your Secure Firewall 3100 chassis contains the chassis serial
number and the Digital Documentation Portal QR code, which points to the getting started guide, the regulatory
and compliance guide, the easy deployment guide, and the hardware installation guide.
Cisco Secure Firewall 3100 Series Hardware Installation Guide
6
One or two power cords (country-specific)
See
Power Cord Specifications, on page 35
a list of supported power cords.
One ground lug kit (part number 69-100359-01)
• One #6 AWG, 90 degree, #10 post ground
lug (part number 32-0608-01)
• Two 10-32 x 0.38-inch Phillips screws (part
number 48-0700-01)
Two slide rails (800-110033-01)
Slide rail accessories kit (53-101509-02):
• Two slide rail locking brackets (part number
700-121935-01)
• Six 8-32 x 0.302-inch slide rail locking
bracket Phillips screws (part number
48-102184-01)
• Two M3 x 0.5 x 6-mm Phillips screws (part
number 48-101144-01)
(Optional; in package if ordered)
Cisco Secure Firewall 3100
This document has a URL and QR code that point
to the Digital Documentation Portal. The portal
contains links to the Product Information page,
the Hardware Installation Guide, the Regulatory
and Safety Information Guide, the Getting Started
Guide, and the Easy Deployment Guide.
4
SFP transceiver
for
(Optional; in package if ordered)
6
Cable management bracket kit (part number
69-100376-01)
• Two cable management brackets (part
number 700-128334-01)
• Four 8-32 x 0.375-inch Phillips screws (part
number 48-2696-01)
(Optional; in package if ordered)
8
Rack-mount bracket kit (53-101510-02):
• Two rack-mount brackets (700-127244-01)
• Six 8-32 x 0.375-inch Phillips screws (part
number 48-2286) for securing the brackets
to the chassis
• Four 10-32 x 0.75-inch Phillips screws (part
number 48-0441-01) for securing the chassis
to your rack
• Four 12-24 x 0.75-inch Phillips screws (part
number 48-0440-01) for securing the chassis
to your rack
(Optional; in package if ordered)
Two power supply module tie wraps and clamps
10
(part number 52-100162-01)
Overview
Advertisement
Table of Contents
