Package Contents; Serial Number Locations - Cisco S195 Hardware Installation Manual

Package Contents

Package Contents
The following figure shows the package contents for the WSA S195, S395, S695, and S695F. Note that the
contents are subject to change and your exact contents might contain additional or fewer items.
Figure 3: Package Contents
1
3
5

Serial Number Locations

The serial number (SN) for the WSA S195, S395, S695, and S695F is printed on the pullout asset card located
on the front panel as shown in the following figure.
Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide
4
Chassis
Cisco rail kit (Cisco part number 800-43376-02)
Useful Links document
The steps in the Useful Links document send you
to the documentation you need to install, set up,
and configure your WSA appliance.
2 RJ-45 to DB9-RS232 console cable (Cisco part
number 72-3383-XX)
4 RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six
feet long (Cisco part number 72-1482-XX)
Two 1-Gb or 10-Gb SFP+ fiber optic transceivers
6
with cables
Note Supported on the S695F. You cannot
mix SFP transceiver types in the same
chassis. You can either have two 1-Gb
or two 10-Gb SFPs in the same
chassis.
Overview