Front Panel Leds - Cisco 3100 Series Hardware Installation Manual

Overview
Note
For More Information
• See
• See
• See
• See
• See
• See

Front Panel LEDs

The following figure shows the Secure Firewall 3100 front panel LEDs.
Figure 6: Secure Firewall 3100 Front Panel LEDs
• ROMMON NVRAM is cleared and returned to default.
• All extra images are removed; the current running image remains.
• FXOS logs, core files, SSH keys, certificates, FXOS configuration, and Apache configuration are
removed.
If power is lost between when you pushed the reset button and when the reset process is complete, the
process stops and you have to push the button again after the system powers back on.
Remove and Replace the SSD, on page 67
Install, Remove, and Replace the Network Module, on page 65
network modules.
8-Port 1/10/25-Gb Network Module, on page 15
6-Port 1-Gb SX/10-Gb SR/10-Gb LR/25-Gb SR/25-Gb LR Network Module with Hardware Bypass
, on page 21 for more information about the network module.
8-Port 10/100/1000Base-T Network Module with Hardware Bypass, on page 19
about the network module.
4-Port 40-Gb Network Module, on page 17
for the procedure for removing a replacing the SSD.
for more information about the network module.
for more information about the network module.
Cisco Secure Firewall 3100 Series Hardware Installation Guide
Front Panel LEDs
for the procedure for installing
for more information
11