Table of Contents
Advertisement
Fig. 2-9
Fig. 2-10
A
B
Fig. 2-11
Fig. 2-12
Fig. 2-13
D
C
E
This means that when using zone A on Power Boost and then
switching zone B to Power Boost , the power to zone A will
reduce slightly. The last zone switched to power boost always
takes priority. Zones C, D and E work in the same way.
This is a built-in safety device.
n
Deactivate the Power Boost function by turning the control
knob to a lower setting.
The Bridging-Zone Function,
Zones A and B can be bridged, creating an area, ideal for use
with an induction griddle (optional extra).
Note: The griddle should comprise of an induction friendly,
flat bottom, large enough to cover zones A and B of the
hotplate heating area (Fig. 2-9).
DO NOT use zones C, D or E to heat the griddle (Fig. 2-10).
To activate the bridging-zone function, simultaneously turn
the two left-hand controls completely clockwise (Fig. 2-11)
and hold until the [ ] symbols appear in the centre of the
hob control display (Fig. 2-12). The temperature can then be
adjusted using the left-hand knob (Fig. 2-13).
Turn both knobs counter-clockwise to cancel the function
and return to normal operation.
DO NOT turn the two left-hand knobs individually to
n
heat the griddle. This can cause excessive temperatures
and damage the coating on the griddle.
Overheat Function
This function identifies when the temperature of the pan rises
rapidly and works to maintain a safe level of pan temperature.
It should not interfere with normal cooking.
Cookware with bases that become distorted (Fig.2-2) when
heated may interfere with the operation of the Overheat
Function. This may result in damage to your cookware or
Induction Glass Hob.
Please remember not to leave the hob unattended.
n
Care should be taken to not allow your cookware to
boil dry. Damage to your cookware and Induction
Glass Hob may result.
Please read and follow the manufacturers' instructions
carefully before using cookware on your induction hob.
12
Advertisement
Table of Contents
