IBM 6380 User Manual page 36

The system-board tray can be turned off in any of the following ways:
v You can press the power-control button on the front of the system-board tray
v You can turn off the system-board tray from the operating system, if the operating
v In an IPMI environment, the system administrator can turn off the system-board
v If the operating system stops functioning, you can press and hold the
v You might be able to turn off the system-board tray by using an optional
22
System x iDataPlex dx360 M2: User's Guide
(see "Operator panel controls, connectors, LEDs, and power" on page 19). This
starts an orderly shutdown of the operating system, if this feature is supported by
the operating system.
system supports this feature. After an orderly shutdown of the operating system,
the system-board tray will be turned off automatically.
tray by using the IPMI chassis control command.
power-control button for more than 4 seconds to turn off the system-board tray.
management appliance.
– If the system is not operating correctly, the management appliance might
automatically turn off the system-board tray.
– Through the management appliance control interface, you might also be able
to configure the management appliance to turn off the system-board tray. For
additional information, see the documentation for your management appliance.