Introducing Cisco Small Business Analog Telephone Adapters
ATA Connectivity Requirements
NOTE
ATA Administration Guide
PAP2T Connectivity
As shown in the following figure, the PAP2T has two FXS ports (voice lines 1 and
2).
Administrative
IVR (Line 1 or
Line 2)
Line 1
Line 2
PAP2T
•
The IVR functions are accessed by connecting an analog telephone to Line 1.
•
For proper operation, the service provider should use an Outbound Proxy to
forward all voice traffic when the PAP2T is located behind a router. If
necessary, explicit port ranges can be specified for SIP and RTP.
IP Router (with
hairpinning) or
Broadband modem
Ethernet
port
LAN
1
Internet
ISP
WAN
IP
IP
ITSP
21