Cisco Small Business Pro SPA3102 Administration Manual page 198

ATA Voice Field Reference
PSTN Line page (SPA3102)
ATA Administration Guide
Use Outbound
Proxy
Outbound Proxy
Use OB Proxy In
Dialog
Register
Make Call Without
Reg
Register Expires
Ans Call Without
Reg
Use DNS SRV
DNS SRV Auto
Prefix
Outbound Proxy
Enable the use of
Outbound Proxy
parameter and
ignored.
The default is no.
SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the
parameter is no, or if the
empty.
The default is yes.
Enable periodic registration with the
Proxy
is ignored if the
The default is yes.
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
The default is no.
Allow answering inbound calls without successful
(dynamic) registration by the unit. If proxy responded to
REGISTER with a smaller Expires value, the PAP2T will
renew registration based on this smaller value instead of
the configured value. If registration failed with an Expires
too brief error response, the PAP2T will retry with the value
given in the Min-Expires header in the error response.
The default is 3600.
Expires value in sec in a REGISTER request. PAP2T will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if the
Register
parameter is no. Range: 0 – (231 – 1) sec
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
The default is no.
If enabled, the PAP2T will automatically prepend the Proxy
or Outbound Proxy name with _sip._udp when performing
a DNS SRV lookup on that name.
The default is no.
. If set to no, the
Use OB Proxy in Dialog
Use Outbound Proxy
Outbound Proxy
parameter is
Proxy
. This parameter
parameter is not specified.
B
is
196