Cisco Small Business Pro SPA3102 Administration Manual page 157

ATA Voice Field Reference
Regional page
ATA Administration Guide
Block Last Act
Code
Block Last Deact
Code
Accept Last Act
Code
Accept Last Deact
Code
CW Act Code
CW Deact Code
CW Per Call Act
Code
CW Per Call Deact
Code
Block CID Act Code Blocks caller ID on all outbound calls.
Block CID Deact
Code
Block CID Per Call
Act Code
Block CID Per Call
Deact Code
Block ANC Act
Code
Block ANC Deact
Code
Blocks the last inbound call.
The default is *60.
Cancels blocking of the last inbound call.
The default is *80.
Accepts the last outbound call. It lets the call ring through
when do not disturb or call forwarding of all calls are
enabled.
The default is *64.
Cancels the code to accept the last outbound call.
The default is *84.
Enables call waiting on all calls.
The default is *56.
Disables call waiting on all calls.
The default is *57.
Enables call waiting for the next call.
The default is *71.
Disables call waiting for the next call.
The default is *70.
The default is *67.
Removes caller ID blocking on all outbound calls.
The default is *68.
Blocks caller ID on the next outbound call.
The default is *81.
Removes caller ID blocking on the next inbound call.
The default is *82.
Blocks all anonymous calls.
The default is *77.
Removes blocking of all anonymous calls.
The default is *87.
B
155