Table of Contents
Advertisement
ATA Voice Field Reference
PSTN Line page (SPA3102)
PSTN Line page (SPA3102)
ATA Administration Guide
Use DNS SRV
DNS SRV Auto
Prefix
Proxy Fallback Intvl This parameter sets the delay (sec) after which the PAP2T
Proxy Redundancy
Method
Voice Mail Server
Mailbox Subscribe
Expires
On the SPA3102, you can use the Voice tab > PSTN Line page to configure your
PSTN line. This page includes the following sections:
•
"Line Enable section" section on page166
•
"NAT Settings section" section on page191
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
The default is no.
If enabled, the PAP2T will automatically prepend the Proxy
or Outbound Proxy name with _sip._udp when performing
a DNS SRV lookup on that name.
The default is no.
will retry from the highest priority proxy (or outbound
proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and
backup proxy server list is provided to the PAP2T via DNS
SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion of
priority and so all hosts will be considered at the same
priority and the PAP2T will not attempt to fall back after a
fail over).
The default is 3600.
PAP2T will make an internal list of proxies returned in DNS
SRV records. In normal mode, this list will contain proxies
ranked by weight and priority.
if Based on SRV port is configured the PAP2T does normal
first, and also inspect the port number based on 1st proxy's
port on the list.
The default is Normal.
Enter the URL or IP address of the server.
Expiry time to the voice mail server. The time to send
another subscribe message to the voice mail server.
B
190
Advertisement
Table of Contents
