Authentication Settings - Passcode - D-Link NUCLIAS CONNECT DAP-2610 Manual

D-Link DAP-2610 User Manual
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, user can view and configure the Captive Portal settings. After selecting Passcode as the authentication type, we can configure
the passcode authentication that will be applied to each wireless client in this network.
Session
Enter the session timeout value here. This value
can be from 1 to 1440 minutes. By default, this
timeout(1-1440):
value is 60 minutes.
Band: Select 2.4GHz or 5GHz.
SSID Index : Select the SSID for this authentication.
Authentication Type :
Select the captive portal encryption type here.
Options to choose from are Web Redirection,
Username/Password, Passcode, Remote
RADIUS, LDAP and POP3. In this section we'll
discuss the Passcode option.
Select Enable to enable the website redirection
Web Redirection State :
feature.
URL Path :
Select whether to use either HTTP or HTTPS
here. After selecting either http:// or https://,
enter the URL of the website that will be used
in the space provided.
IPIF Status : Select to Enable or Disable the Captive Portal
with its IP interface feature here.
VLAN Group :
Enter the VLAN Group ID here.

Authentication Settings - Passcode

46