Start-Up Checklist - Bryant Legacy 547K 04 Series Installation Instructions Manual

START-UP CHECKLIST FOR 547K*04-07 SINGLE PACKAGE ROOFTOP HEAT PUMP UNITS
NOTE: To avoid injury to personnel and damage to equipment or
property when completing the procedures listed in this start-up
checklist, use good judgment, follow safe practices, and adhere
to the safety considerations/information as outlined in preceding
sections of this Installation Instruction document.
I. PRELIMINARY INFORMATION
MODEL NO. __________________________________________
JOB NAME ___________________________________________
SERIAL NO. ___________________________________________
ADDRESS _____________________________________________
START-UP DATE _______________________________________
TECHNICIAN NAME ___________________________________
ADDITIONAL ACCESSORIES
_____________________________________________________________________________________________________
II. PRE-START-UP
Verify that all packaging materials have been removed from unit.
Verify installation of outdoor air hood.
Verify that condensate connection is installed per instructions.
Verify that all electrical connections and terminals are tight.
Verify ground integrity with a continuity test.
Check that indoor-air filters are clean and in place.
Check that outdoor air inlet screens are in place.
Verify that unit is level.
Verify that fan assembly is free of obstructions and rotor spins freely.(Y/N) _____
Verify that scroll compressors are rotating in the correct direction.
Verify installation of thermostat.
III. START-UP
ELECTRICAL
Supply Voltage L1-L2_____________
Compressor Amps 1 L1 _____________
Compressor Amps 2 L1 _____________
Supply Fan Amps L1 _____________
Outdoor Fan Amps L1 _____________
TEMPERATURES
Outdoor-Air Temperature
Return-Air Temperature
Cooling Supply Air Temperature
(continued on following page)
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
(Remove and use for job file)
L2-L3_____________
L2 _____________
L2 _____________
L2 _____________
L2 _____________
_____________ °F DB (Dry Bulb)
_____________ °F DB
_____________ °F
(Y/N) _____
(Y/N) _____
(Y/N) _____
(Y/N) _____
(Y/N) _____
(Y/N) _____
(Y/N) _____
(Y/N) _____
(Y/N) _____
(Y/N) _____
L3-L1_____________
L3 _____________
L3 _____________
L3 _____________
_____________ °F WB (Wet Bulb)
Form No:II547K-4-7-03
CL-1
Replaces: II547K-4-7-02