Table of Contents
Advertisement
Steps
1. Align the air shroud tabs with the slots in the computer.
NOTE:
Ensure that the air shroud tabs are below the surface of the cooling cage fan assembly.
2. Press the air shroud down until the tabs clicks into place.
Next steps
1. Install the
system
cover.
2. Follow the procedure in
Processors and heat sinks
Removing the processor and heat-sink module
Prerequisites
1. Follow the procedure in
WARNING:
The heat-sink may become hot during normal operation. Allow sufficient time for the heat-sink to
cool before you touch it.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat-sink. The
oils in your skin can reduce the heat transfer capability of the thermal grease.
2. Remove the
system
cover.
3. Remove the
air
shroud.
About this task
The following images indicate the location of the processor and heat-sink module and provide a visual representation of the
removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
29
Advertisement
Table of Contents
