Table of Contents
Advertisement
Steps
1. Align and slide the left control panel in the slot on the computer.
2. Route the left control panel cable through the side wall of the computer.
3. Align and slide the left control panel cable cover in the slot on the system.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
4. Connect the left control panel cable to its connector on the system board.
5. Replace the eight screws to secure the left control panel and the cable cover to the system.
Next steps
1. Install the
air
shroud.
2. Install the
cooling fan
3. Install the
system
cover.
4. Follow the procedure in
assembly.
After working inside your
computer.
Removing and installing components
49
Advertisement
Table of Contents
