Dell Precision 7960 Service Manual page 90

Table 8. System setup options—Boot Settings menu (continued)
Boot Settings
Hard-disk Drive Placeholder
Clean all SysPrep variables and order
UEFI Boot Settings
Table 9. System setup options—Network Settings menu
Network Settings
UEFI PXE Settings
Number of PXE Devices
PXE Device 1
PXE Device 2
PXE Device 3
PXE Device 4
PXE Device 1 Settings
PXE Device 2 Settings
PXE Device 3 Settings
PXE Device 4 Settings
UEFI HTTP Settings
HTTP Device 1
HTTP Device 2
HTTP Device 3
HTTP Device 4
HTTP Device 1 Settings
HTTP Device 2 Settings
HTTP Device 3 Settings
HTTP Device 4 Settings
UEFI ISCSI Settings
ISCSI Initiator Name
ISCSI Device 1
90 BIOS setup
Enables or disable the Hard-disk Drive Placeholder .
By default, the Disabled option is selected.
Displays the Clean all SysPrep variables and order of the system.
By default, the None option is selected.
Select this menu to configure the Boot Sequence and enable or disable
individual boot options.
By default, 4 drop down is selected.
Enables or disable the PXE Device 1.
By default, the Enabled option is selected.
Enables or disable the PXE Device 2.
By default, the Disabled option is selected.
Enables or disable the PXE Device 3.
By default, the Disabled option is selected.
Enables or disable the PXE Device 4.
By default, the Disabled option is selected.
This field controls the configuration for PXE device 1.
This field controls the configuration for PXE device 2.
This field controls the configuration for PXE device 3.
This field controls the configuration for PXE device 4.
Enables or disable the HTTP Device 1.
By default, the Disabled option is selected.
Enables or disable the HTTP Device 2.
By default, the Disabled option is selected.
Enables or disable the HTTP Device 3.
By default, the Disabled option is selected.
Enables or disable the HTTP Device 4.
By default, the Disabled option is selected.
This field controls the configuration for HTTP device 1.
This field controls the configuration for HTTP device 2.
This field controls the configuration for HTTP device 3.
This field controls the configuration for HTTP device 4.
By default, this is blank.
Enables or disable the ISCSI Device 1.