Siemens SIMATIC IFP1200 Basic Operating Instructions Manual page 37

Procedure (SIMATIC IFP1200/1500/1900/2200 Basic)
1. Switch off the 24V DC power supply.
2. Ensure that the cable ends of the power
supply lines are fitted with end sleeves.
3. Fasten the end of a connecting cable L+ and a
connecting cable M with the supplied power
supply connector.
4. Connect the power supply connector to the
relevant terminal on the device.
5. Connect the remaining L+ and M ends with
the respective terminals on the 24V DC power
supply.
IFP Basic
Operating Instructions, 06/2023, A5E46178354 - AD
Installing and connecting the device
3.3 Connecting the device
37