Polaris RANGER 1000 2023 Owner's Manual page 125

HEADLIGHT ADJUSTMENT
The headlight beams are adjustable.
1. Place the vehicle on a level surface with the headlight approximately 25 ft.
w
(7.6 m) from a wall.
ITEM
q
w
e
2. Measure the distance from the floor to the center of the headlight and make a
mark on the wall at the same height.
3. With the machine in PARK, start the engine and turn the headlight switch to
the LOW position.
4. The most intense part of the LOW beam headlight beam should be aimed 7.5
q
in (19.0 cm)
Rider weight must be included in the seat while performing this procedure.
Measure Distance = 7.5 in (19.0 cm)
Measure Distance = 25 ft (7.6 m)
Headlight Center of Bulb
below the mark placed on the wall.
DESCRIPTION
NOTE
MAINTENANCE
123