NordicTrack C4si User Manual page 7

3. While another person holds the Upright (2) near
the Frame (1), locate the wire tie inside the
Upright.
See the inset drawing. Tie the lower end of
the wire tie to the ends of the Game/Pulse and
Main Wire Harnesses (42, 43). Then, pull the
other end of the wire tie upward until the Wire
Harnesses are routed completely through the
Upright (2).
Tip: Do not pinch the Wire Harnesses (42,
43). Attach the Upright (2) to the Frame (1) with
an M10 x 63mm Bolt Set (62).
4. Identify the Right and Left Handlebars (59, 60),
which are marked with "Right" and "Left" stickers.
Tip: Do not damage the Wire Harnesses (42,
43). Attach the Handlebars (59, 60) to the
Upright (2) with two M8 x 53mm Button Bolts
(72) and two M8 Jam Locknuts (89).
3
43
42
62
4
60
89
42
7
Wire Tie
2
42, 43
1
62
Avoid
pinching
the Wire
Harnesses
(42, 43)
Avoid
damaging the
Wire Harnesses
(42, 43)
43
2
59
72