Table of Contents
Advertisement
Networking
SINUMERIK ONE offers integrated PROFINET functionality.
PROFINET IO is supported:
• As part of PROFINET, PROFINET IO is a communication concept that is used to implement
modular, distributed applications. PROFINET IO is based on Industrial Ethernet and allows
distributed field and I/O equipment to be connected to the central processing unit.
• At the NCU up to 255 PROFINET IO devices can be operated at interface X150 as IO controller,
and up to 128 PROFINET IO devices at interface X160.
3.3
Variants
The scalability of the hardware and software – both from a CNC perspective and in terms of
operation – means that the SINUMERIK ONE can be used in many sectors. The possibilities range
from simple positioning tasks up to complex multi-axis systems.
Application areas and performance
• On the NCU, the number of axes and/or the performance of the drive control can be increased
to 12 axes. This is achieved through the use of the NX modules. The NCU can be expanded
by up to 5 NX modules for increased performance of the drive control and number of axes.
• Using an NCU 1740 is recommended for maximum dynamic performance and accuracy in
mold making or in the High Speed cutting sector.
The following table shows the key characteristics of the various NCU versions:
Table 3-1
DRIVE-CLiQ ports
Axes
NX10.3 / 15.3
ITC
Channels
Mode groups (BAG)
Maximum resolution with SINUMERIK Operate for
NCU
3.4
Ordering data
Table 3-2
System component
NCU 1740
Numeric Control Extension NX15.3 (High Extension)
Numeric Control Extension NX10.3 (Standard Extension)
NCU 1740
Equipment Manual, 09/2022, A5E51087503B AC
Versions of the NCU 1740
Order data for system components
4
12 CNC axes (max. 20 axes, incl. PLC axes)
Up to 3
Up to 2
Up to 4
10
1920 x 1080px
Article number
6FC5317-4AA00-0AA0
6SL3040-1NB00-0AA0
6SL3040-1NC00-0AA0
System overview
3.4 Ordering data
27
Advertisement
Table of Contents
