Making A Call - Sony WH-CH510 Help Manual

Wireless stereo headset
Hide thumbs Also See for WH-CH510:
Table of Contents

Advertisement

Help Guide
Wireless Stereo Headset
WH-CH510

Making a call

You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Only ordinary phone calls are supported. Applications for phone calls on smartphones or personal computers are not
supported.
Connect the headset to a smartphone or mobile phone via Bluetooth connection.
1
Operate your smartphone or mobile phone to make a call.
2
When you make a call, the dial tone is heard from the headset.
If you make a call while you are listening to music, playback pauses.
If no dial tone is heard via the headset, switch the call device to the headset using your smartphone or mobile
phone or by pressing and holding the
A: Microphone
Adjust the volume by pressing the +/- buttons of the headset.
3
When the volume reaches the maximum or minimum, an alarm sounds.
When you finish your phone call, press the
4
If you made a call during music playback, music playback resumes automatically after ending the call.
Hint
Volume for a call can be adjusted during a telephone conversation only.
The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not
change the volume of music playback and vice versa.
Note
Use a smartphone or mobile phone at least 50 cm (19.69 in.) away from the headset. Noise may result if the smartphone or
mobile phone is too close to the headset.
Your voice will be heard from the headset through the headset's microphone (Sidetone function). In this case, ambient sounds or
the sounds of the headset operation may be heard through the headset, but this is not a malfunction.
(call) button down for about 2 seconds.
(call) button on the headset to end the call.
71

Advertisement

Table of Contents
loading

Table of Contents