Connecting To A Paired Bluetooth Device - Sony WH-CH510 Help Manual

Help Guide
Wireless Stereo Headset
WH-CH510

Connecting to a paired Bluetooth device

Turn on the headset.
1
Press and hold the
Check that the indicator (blue) continues to flash after you release your finger from the button. You will hear the
voice guidance say, "Power on".
If it has automatically connected to the last connected device, you will hear the voice guidance say, "Bluetooth
connected".
Check the connection status on the Bluetooth device. If it is not connected, proceed to step 2.
Make the Bluetooth connection from the Bluetooth device.
2
As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth
device. When connected, you will hear the voice guidance say, "Bluetooth connected".
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.
Note
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. In that case, deactivate the Bluetooth function on the last-connected device or turn off the power.
If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device and
perform the pairing again. As for the operations on your Bluetooth device, refer to the operating instructions supplied with the
Bluetooth device.
Related Topic
How to make a wireless connection to Bluetooth devices
(power) button for about 2 seconds.
56