Sony WH-CH510 Help Manual page 64

Help Guide
Wireless Stereo Headset
WH-CH510
Listening to music from a device via Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and perform basic remote
control operation of the device from your headset via Bluetooth connection.
A2DP（Advanced Audio Distribution Profile）
You can enjoy high-quality music wirelessly.
AVRCP（Audio Video Remote Control Profile）
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Connect the headset to a Bluetooth device.
1
Put on the headset.
2
Adjust the length of the headband.
Put the headset on your head with the
There is a tactile dot on the
A: Tactile dot
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Adjust the volume by pressing the +/- buttons of the headset.
4
When the volume reaches the maximum or minimum, an alarm sounds.
Hint
The headset supports SCMS-T content protection. You can enjoy music and other audio on the headset from a device such as a
mobile phone or portable TV that supports SCMS-T content protection.
Depending on the Bluetooth device, it may be necessary to adjust the volume or set the audio output setting on the device.
The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not
change the volume of music playback and vice versa.
(left) mark on your left ear and the
(left) unit.
64
(right) mark on your right ear.