Samsung Wisenet SDC-9443BV User Manual page 18

camera operations
wHite Bal
< main menu >  < wHite Bal (ATW/AWC  SET/INDOOR/OUTDOOR/MANUAL/AWB) >
• ATW : When the color temperature is between 1,800K° and 10,500K°, set as ATW.
• AWC  SET : Set the white balance manually according to the current color temperature.
• INDOOR : When the color temperature is between 4,500K° and 8,500K°, set as INDOOR.
Adjust the white balance to optimize the color of camera in the indoor environment.
• OUTDOOR: The color temperature is between 1,800K°~10,500K°. (Including sodium lamp) To enable the
camera to restore the original color correctly in the outdoor environment, the white balance shall be
adjusted.
• MANUAL : Choose "manual" to adjust the white balance manually.
manual wB
1.Blue
2.red
3.return
• BLUE : 0-100 (optional). The larger the value, the bluer the image.
• RED : 0-100 (optional). The larger the value, the redder the image.
• RETURN : RET/SAVE&END
• AWB : Back to normal color under special scenario, such as under tungsten filament lamp, or fluorescent
lamp.
In this case, "white balance" cannot work normally.
In following cases, please choose the "AWB" mode.
`
M
When the color temperature of the object surroundings exceeds the control range (such as clear sky or sunset), choose the
`
item.
When the ambient light illumination of the subject is dark, if the camera faces towards the fluorescent lamp or installed in a
`
place where the illumination changes significantly, the operation of "white balance" may be unstable.
18_ camera operations
.........|.....50
.........|.....50
ret