Camera Menus; Main Menu - Samsung Wisenet SDC-9443BV User Manual

camera operations

camera menuS

1. Open DVR main menu, and go to Device  PTZ 
Protocol. (Based on DVR SDR-B73303/SDR-B74303/
SDR-B75303) Set Coax as Protocol.
2. Go to live view interface, left click on the live channel and
select the PTZ control icon [
interface.
Click the icon [
`
M
is also to be used as Confirm icon. Up, down and right and left
buttons [ $,%,+,_ ] are used to select the menu.
The display menu may be different for different DVRs.
Item with <
`
The item with < - - - > icon is not available due to function setting.
`

main menu

expoSure
< main menu >  < expoSure >
main menu
1.expoSure
2.BacKliGHt
3.wHite Bal
4.nr
5.Special
6.adjuSt
7.exit
SHutter
• NTSC : AUTO / FLK / 1/50,000sec~1/30sec / X2 ~ X30;
• PAL : AUTO / FLK / 1/50,000sec~1/25sec / X2 ~ X30
• AUTO : Indicate automatically adjusting the shutter according to the light.
• FLK : Anti-flicker. It is used in special scenarios, such as under the fluorescent lamp.
The larger the shutter value, the brighter the image, but the bigger the after image of the moving object.
`
M
When the shutter value is small, there will be Noise, Spots and whiting, which is normal.
] to have the following
] to go to AHD camera OSD menu. This icon
> icon includes submenu. You can go to the sub menu and do the settings.
off
atw
Save&end
expoSure
1.SHutter
2.aGc
3.SenS-up
4.BriGHtneSS
5.d-wdr
6.defoG
7.return
auto
.........|.....13
off
.........|.....34
off
off
ret
English _15