Samsung Wisenet SDC-9443BV User Manual page 14

connection and installation
uSe of communication
• Coaxial communication system
connection and inStallation
video cable
Connect the video output jack of the camera to the monitor with BNC coaxial cable, as shown below: Please use an
auxiliary video amplifier if the distance between the camera and monitor exceeds the recommended maximum
value.
It is recommended to use the pure copper coaxial cable instead of the copper-clad iron cable, otherwise, it will result in
`
M
problems of the communication via the coaxial cable.
To guarantee the image quality, only use single-channel video output connector when connecting the camera to other video
`
equipment.
14_ connection and installation
DVR
Distance
500m
300m
Recommended cable specification
5C2V
3C2V