Service Parts; Hour / Maintenance Meter; Check Safety Interlock System - Gravely Pro-Turn Z52 Operator's Manual

SERVICE PARTS

See your Gravely dealer to purchase service
parts for your unit.
Description
Transaxle Drive Belt
Mower Belt – Left 52"
Mower Belt – Right 52"
Mower Belt – Left 60"
Mower Belt – Right 60"
Mower Blade – 52"
Mower Blade – 60"
Seat Switch
Hydraulic Oil – 32 oz
(1 Qt.)
Hydraulic Oil Filter
Fuel Filter
Fuel Filter
Engine Oil FIlter
Engine Oil Filter
Air Filter
Air Filter – Inner Element
Air Filter – Outer Element
Muffler Gasket
Fuel Stabilizer – 118 ml
(4 oz.)
• Except Canada
• For Canada only

HOUR / MAINTENANCE METER

Hour Meter-only Models
Hour meter measures engine runtime and
cannot be reset.
Maintenance Models
See Figure 19.
When the key is in the on position, the Timer
mode displays. Press the Mode button to
toggle between different modes.
Timer: Measures engine runtime until reset.
To reset the timer, press the Mode button to
select TMR1 mode and then hold Mode
button for 3 seconds.
IMPORTANT: Turn ignition key to the off
position when unit is not in use. Some meters
may count hours when the key is in the on
position, even if the engine is off. This results
in inaccurate maintenance intervals.
Qty. Part No.
1 07225600
1 07200816
1 07200806
1 07200817
1 07200807
3 03253800
3 03253900
1 02754100
AR 00057100
2 21545100
1 21567300
1 21548101
1 21567200
1 21535800
1 21567400
1 21548700
1 21548800
1 05600520
AR
04730400
04742500
EN - 20
Service Alerts: Counts down hours until
service is needed and displays "Now" when
service is due. Service time is measured for:
• Engine oil and filter changes (CHG OIL)
• Hydraulic oil and filter changes (CHG H
OIL)
• Air filter service (SVC AIRFILTER)
The service intervals preset into the hour
meter are:
• Hydraulic oil and filter: First 75 hours and
every 400 hours thereafter
• Engine oil and filter: First 25 hours and
every 100 hours thereafter
• Air filter: Every 100 hours
NOTICE: The preset engine oil services
intervals are normal recommended intervals.
Specific engine manufacturer's
recommendations may vary.
To clear a service message, press the mode
button to select service alert mode and then
hold the mode button for 3 seconds.
1. Mode Button
Figure 19
CHECK SAFETY INTERLOCK
SYSTEM
Check function of the Safety Interlock System
by performing the tests below. Contact your
Gravely dealer for repair if any of the tests
fail.
Test Steering PTO Parking
Levers
Starting Interlock
1 Neutral Off
2 Forward, On
Neutral,
Reverse
3 Forward, On
Neutral, or
Reverse Off
Operating Interlock (Engine On)
1
Result
Brake
On Engine
starts.
On or Engine does
Off not start.
Off Engine does
not start.