Lever; Adjust Discharge Chute - Ariens Sno-Thro Compact 24 Operator's Manual

ADJUST DISCHARGE CHUTE

DEFLECTOR LEVER
See Figure 25.
If deflector does not stay in selected position,
tighten the nut under the control panel.
Figure 25
If deflector does not follow full range of travel:
1. Position deflector control in the rear-most
position.
2. Adjust nuts on chute cable. See
Figure 26.
• To adjust deflector lower, loosen lower
nut and tighten upper nut.
• To adjust deflector higher, loosen upper
nut and tighten lower nut.
1
2
3
1. Chute Cable
2. Upper Adjustment Nut
3. Lower Adjustment Nut
ADJUST DISCHARGE CHUTE
See Figure 27.
If discharge chute does not stay in selected
position, tighten nut on carriage bolt.
EN - 18
Figure 26
Figure 27