Table of Contents
Advertisement
Hardware Installation
Warnings: Network cards are sensitive to static electricity. To protect the card, always
touch the metal chassis of your notebook or the ground before handling the card.
1.
Turn on your notebook.
2.
Find an available Type II or Type III PCMCIA slot in your notebook.
3.
With the PC Card's 68-pin connector facing the PCMCIA slot, label side up, slide the
card completely into the slot as shown below.
Note: The PCMCIA slot allows you to "hot swap" PC Cards any time.
4.
Install the appropriate driver into your system. Drivers can be found on the driver CD
that comes with the package. See the following section for instructions.
4
Advertisement
Table of Contents
