Changing A Specific Option - Samsung AM140RNPDKH Series Installation Manual

Changing a specific option

You can change each digit of set option.
Option
Explanation
Remote controller display
Indication and Details
Option
Explanation
Remote controller display
Indication and Details
When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
When changing a digit of indoor unit installation option, set the SEG3 as '2' .
NOTE
Ex) When setting the 'buzzer control' into disuse status.
Option
Explanation
Setting
Option
Explanation
Setting
If you are using heat pump model, mixed operation mode (two or more indoor units operating in different
operation mode simultaneously) is not available when the indoor units are connected to one outdoor unit. If you
CAUTION
set the master indoor unit with a remote controller, outdoor unit will operate in the mode which was set in the
master indoor unit.
SEG1
Page
-
Indication Details
0
SEG4
Tens digit of option SEG to
change
Indication Details
Tens digit of
0~9
SEG
SEG1
Page
0
SEG4
Tens digit of option SEG to
change
1
ENGLISH-32
SEG2
Mode
Indication Details
D
SEG5
Unit digit of option SEG to
change
Indication Details
Unit digit of
0~9
SEG
SEG2
Mode
D
SEG5
Unit digit of option SEG to
change
7
SEG3
Option mode to change
Indication Details
Option mode 1~6
SEG6
Changed value
Indication Details
Changed value 0~F
SEG3
Option to change
2
SEG6
Changed value
1