Remote Operation - Lopi 864 GSR2 Owner's Manual

10

Remote Operation

When the switch on the battery holder is set to "REMOTE" the transmitter operates the fireplace. Once
you understand how the transmitter works, you will be able to operate your fireplace quickly and easily.
Display Overview
The transmitter display has four main sections (see Figure 4).
Read-Out
(Thermostat Setting,
Function, etc.)
Listen for the "Beep"
Each time you press a button on the transmitter that controls the fireplace, a "beep" will come from the
IFC. When you change thermostat target settings the IFC will not beep.
NOTE: When the batteries start to get low, the IFC will beep twice whenever a button is pressed. When
the batteries are nearly depleted, the IFC will no longer beep. See "IFC Batteries" on page 14).
© Travis Industries
Operation
Thermostat Display
F
ON
8/9/2022 - 1485
Room Temperature Display
Mode Display (Flame, Blower, Light, Comfort Control)
Figure 4
864 GSR2 Op Man