Checking Settings - Canon WFT-E6 Manual

Checking Settings

You can check the current Wi-Fi network settings using the camera's [Network Settings] status
screens.
Network configuration name
1
(Infrastructure connections only)
2 Network connection type
3 Network name (SSID)
4 Authentication and encryption method
5 WEP index key
Frequency and channel used (Camera
6
Access Point connections only)
7 IP address assignment method
8 IP address assigned to the camera
9 Subnet mask
1
Press an assignable button set to
[Status].
For details about using assignable buttons, refer to
Assignable Buttons in the camera's Instruction
Manual.
2
Push the joystick up/down or turn the
SELECT dial to display the four
[Network Settings] status screens.
1
2
3
7
8
9
10
10 MAC address
Browser Remote: Camera identifier
11
and port number
12 Browser Remote: User selection
Browser Remote: User settings
13
User names and password protection*
* Passwords are only shown for the default
settings. When a password was set by the
user, the status screen will only show if a
password is set or not but the actual
password will not be displayed.
4
5
6
11
12
13
21