Pro-Form 705 CST User Manual page 11

11. Set the console assembly on the Left Handrail
(88) and the Right Handrail (87). Be careful not
to pinch any wires. Insert the excess Upright
Wire (not shown) into the Left Handrail.
Attach the console assembly with six #8 x 1/2"
Screws (1), four 1/4" x 1/2" Bolts (36), four 5/16"
Flat Washers (113), and four 1/4" Star Washers
(35) as shown. Start all six Screws and all
four Bolts, and then tighten each of them.
See step 7. Fully tighten the four 5/16" x 1"
Bolts (5) and the two 5/16" x 1 1/4" Bolts (4).
12. Firmly tighten the four the 3/8" x 2 3/4" Bolts (7)
and the four 3/8" x 1 1/4" Bolts (8) (only one
side is shown).
Press the Left Base Cover (82) and the Right
Base Cover (83) onto the Base (94) until they
snap into place.
13. Slide the Left Handrail Cover (85) onto the Left
Handrail (88). Slide the Right Handrail Cover
(86) onto the Right Handrail (87). Attach the
Handrail Covers with two #8 x 1/2" Screws (1).
All manuals and user guides at all-guides.com
11
11
87
35
113
36
1
12
7
8
94
82
13
85
88
1
Console
Assembly
88
35
113
36
1
1
83
86
87
1