Dimplex Sierra SIL48M Owner's Manual page 17

Operation
POWER ON/OFF
The ON/OFF button turns the fireplace ON and OFF. When the fireplace is OFF,
pressing the ON/OFF button on the remote control or touching the icon on the front
glass will turn on the fireplace. If the ON/OFF button is pressed again within 10
seconds it will turn OFF the fireplace. With inactive controls, press twice to turn OFF
the fireplace. The first press on the ON/OFF button lights up the touchscreen icons
and activates the controls.
The fireplace has a built-in memory function. When the fireplace is turned back
on, the display will show the last selected function and it will start at the last used
settings (except timer). If the fireplace is disconnected from the main power source,
it will restart at the default settings.
FLAME CONTROL
This button is used to turn flames ON, to alter the flame color and to turn flames
OFF. Press the Flame button multiple times to cycle through 7 solid color options
(L8, L7, L6, L5, L4, L3, L2), color rotation option (L1) and flames OFF.
While L8, L7...or L2 is displayed, press the Level Selection button to change the
brightness of the flames from the available options: 3- High, 2-Medium and 1-Low.
HEAT ON/OFF
Pressing the Heat control turns the heater on and off.
With Heat ON and set temperature displayed, press the Level Selection button
multiple times to cycle through the 11 temperature settings:
72°F, 74°F, 76°F, 78°F, 80°F, 82°F, ON, 64°F, 66°F, 68°F, 70°F, (22°C, 23°C, 24°C,
25°C, 26°C, 27°C, ON, 18°C, 19°C, 20°C, 21°C).
'ON' means the heater operates continuously.
Changing the temperature unit (°F
With Heat ON and display showing the set temperature, press and hold the ON/
OFF icon on the touchscreen for 5 seconds. The display will flash 3 times and it will
switch from °F to °C or °C to °F.
!
This function cannot be set with the remote control.
NOTE:
°C):
17