SMC Networks SMC8024L2 Management Manual page 58

C
ONFIGURING THE
• Port - The front-panel port-number of the port. This cannot be changed.
• Allowed number of Learned MAC addresses - Set maximum of MAC
addresses which can be learned by this port. The Mode settings for the
port are set by a single drop-down list.
•
•
•
Note:
Note:
• Number of Learned MAC addresses - Display the number of
currently learned MAC addresses. The string '-' is displayed if a port is
setup with "No Limit" mode in the Allowed number of Learned MAC
addresses field.
• Intrusion Action - Action to be carried out if unauthorized MAC
addresses are detected.
•
•
• Trunk - Display the trunk ID if the port is member of a trunk group.
50
S
WITCH
No Limit - No limitation on the number of dynamcally learned
MAC address. Also means disable port security.
8/7/6/5/4/3/2/1 - The maximum number of dynamically
learned MAC address.
0 - No dynamically learned MAC address is allowed on this port.
But this has no influence on the static MAC address.
Port security only handles dynamically learned MAC addresses
and have no limitations on static MAC addresses. On this switch,
24 static MAC address can be configured by System > Static
MAC.
The MAC addresses already in the address table will be retained
and will not age out. Any other device that attempts to use the
port will be prevented from accessing the switch.
Deny New Stations - The station with unauthorized MAC
address will be denied to access the port.
Send Trap and Deny New Stations - Besides denying the new
station, trap message is sent by the switch to report an intrusion
action.