Table of Contents
Advertisement
Loewe bild 9
Operating manual
Recordings
Digital Recorder
DR + Streaming
Using the DR+ streaming function, you can view films via your home
network from the DR archives of other Loewe TVs that have been set
up for this function, as long as these units make their DR archives
accessible.
Also, you can make the DR archive of your TV set available to any other
TV sets and UPnP clients equipped with this feature. They will then be
able to access the archive via your home network.
To use DR + streaming, at least two Loewe TV sets are required, of
these, at least one TV set with integrated hard disk (with Chassis
SL1xx, SL2xx, SL3xx, SL4xx as DR+ Streaming Server).
The TV sets also need to be connected via a network (wireless
connection via Wi-Fi or cable connection via Ethernet, PowerLine).
Archive entries can only be provided or released in the network by
TV sets with integrated hard disks (DR + )
In case of these TV sets which are used as DR+ Streaming Servers,
the DR+ archive must be made available for other TV sets:
System settings
Control
Share DR+ archive with other devices
Archive entries released in the network can be replayed by all TV
sets with chassis SL1xx, SL2xx, SL3xx,SL4xx and Chassis MB180.
In case of these TV sets used as DR+ Streaming Clients, access to
other DR+ archives must be enabled:
System Settings
Control
Also use other archives
Functions requiring write access to a device that enables the re-
cording to be viewed are not available when viewing a DR+ archive
entry over the network.
Such functions are, for example, child protection, delete protection,
renaming, deleting entry or bookmark, setting bookmark, deleting
or hiding parts of the recording.
Playback of DR+ archive entry via the network
Open the DR+ archive.
Select desired archive of the corresponding
device,
OK Display archive entries.
Select the required archive entry,
OK Play archive entry.
See chapter Video, section Video playback for
further information.
(1
for device type with integrated hard disk.
26
more ...
DR+
DR+ Streaming
yes.
more ...
DR+
DR+ Streaming
yes.
Follow-Me function
The Follow me function enables you to interrupt a current programme
in a TV set (main device) with integrated hard disk and to continue view-
ing it with a TV (secondary device) set from the point of interruption.
To use Follow-Me function, at least two Loewe TV sets are required,
of these, at least one TV set with integrated hard disk (with Chassis
SL1xx, SL2xx, SL3xx, SL4xx).
The TV sets also need to be connected via a network (wireless
connection via WLAN or cable connection via Ethernet, PowerLine).
On the main TV set, the function must be enabled
System settings
Control
Share DR+ archive with other devices
On the target TV set (secondary device), the function must be
enabled:
System Settings
Control
Also use other archives
Start Follow-Me function on main device
Press PAUSE key.
The TV image becomes a freeze frame and the DR
status display appears.
Activate Follow-Me
You will see a message on the screen.
The archive recording starts in approximately 20
seconds without an entry. The TV set switches itself
off after starting the recording. The broadcast is
adopted into the DR archive.
The recording TV set will make the broadcast available
to the network from now.
You can indicate the beginning of a Follow-Me
recording at the target TV sets in your network by
a screen display.
Continue viewing the programme at the second device
Call on the TV set, where you want to view the broadcast, the DR+
archive of the recording TV set.
Open the DR+ archive.
Select archive of the recording TV set (main
device),
Display archive entries.
Select Follow-Me recording,
OK View recording.
(1
:
more ...
DR+
DR+ Streaming
yes.
more ...
DR+
DR+ Streaming
yes.
.
Advertisement
Table of Contents
