Initial Installation - Loewe bild 9 Operating Manual

Loewe bild 9
Operating manual

Initial installation

Initial installation wizard
Initial installation after switching on for the first time
The Initial installation wizard starts automatically with an initial instal-
lation. It may be called repeatedly again.
If a parental lock is activated, the access code must be entered
before repeating initial installation.
First installation wizard routine
The selected settings affect the routine of the Initial installation wizard.
Menu
language
Select desired Menu language.
OK Confirm selection.
Selecting the language of the user guidance is the
wizard's first step. Then you simply follow the instruc-
tions on your TV screen.
Proceed to next step.
A licence agreement will be displayed.
Scroll through the licence agreement.
OK Confirm the licence agreement and proceed to
the next step.
Energy
efficiency
Select Energy efficiency.
OK Confirm selection.
Determine how energy efficient your TV set shall
be. The value for the contrast (and thus the
brightness of the background lighting) is adapted
and the automatic dimmer activated or
deactivated depending on the presetting.
14
Energy Home mode:
efficiency
The emphasis for home use is on low energy
(continued)
consumption. The automatic dimmer is activated.
Premium mode:
This mode optimises the settings to a brighter
environment at a higher energy consumption. The
automatic dimmer is activated.
The use of this energy efficiency setting must be
confirmed afterwards once again.
Shop mode:
The picture settings are aligned to operation in
the presentation room. The automatic dimmer is
deactivated. If the ambient brightness diminishes, the
energy consumption is not reduced.
The use of this energy efficiency setting must be
confirmed afterwards once again.
Not all image and sound settings will be stored in
the shop mode. These settings will be reset to the
works setting after re-starting.
The presetting can be changed later in System
settings under Control
Proceed to next step.
Location of
TV set
Select Location of TV set.
OK Confirm selection.
For certain locations (e.g., Australia), there
is finally a selection screen where you can
indicate in which state/territory the device
is being operated.
Proceed to next step.
Follow the instructions on the screen for the following
steps.
With the selection of the TV set location the country-
specific presettings are adopted.
In most cases, the predetermined parameters can
be adopted.
Energy efficiency.