Zero Slash - SATO M8485Se Programming Reference Manual

ZERO SLASH

FUNCTION
To allow printing of numeric zeroes with a slash.
FORMAT <ESC>LHa
Place in a separate data stream before any label data is transmitted.
EXAMPLE
<ESC>A
<ESC>LH0
<ESC>Z
OUTPUT This command does not result in printer output.
NOTES
This command can also be set using the LCD panel. The last setting received, whether it is via this
command or manually input via the LCD panel will be active.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = 0: Print zeroes without slash
1: Print zeroes with slash
4-92
PN: 9001096B