Troubleshooting - Denon DVM-2845CI Service Manual

FLOW CHART NO.1 FLOW CHART NO.1
The power cannot be turned on. The power cannot be turned on.
Is the fuse normal? Is the fuse normal?
Is normal state restored when once unplugged Is normal state restored when once unplugged
power cord is plugged again after several seconds? power cord is plugged again after several seconds?
Is the CHG +3.3V line voltage normal? Is the CHG +3.3V line voltage normal?
Is each voltage of the secondary side normal? Is each voltage of the secondary side normal?
When pressing POWER button (SW2101), is the When pressing POWER button (SW2101), is the
voltage of 0V supplied to pin(42) of IC3001? voltage of 0V supplied to pin(42) of IC3001?
Is the voltage of 3.3V supplied to pin(1) of IC3001? Is the voltage of 3.3V supplied to pin(1) of IC3001?
Replace IC3001. Replace IC3001.
FLOW CHART NO.2 FLOW CHART NO.2
The fuse blows out. The fuse blows out.
Check the presence that the primary component Check the presence that the primary component
is leaking or shorted and service it if defective. is leaking or shorted and service it if defective.
After servicing, replace the fuse. After servicing, replace the fuse.
FLOW CHART NO.3 FLOW CHART NO.3
When the output voltage fluctuates. When the output voltage fluctuates.
Does the photo coupler circuit on the secondary Does the photo coupler circuit on the secondary
side operate normally? side operate normally?
Check IC1001, D1012, D1024 and their periphery, Check IC1001, D1012, D1024 and their periphery,
and service it if defective. and service it if defective.
FLOW CHART NO.4 FLOW CHART NO.4
When buzz sound can be heard in the vicinity of AV circuit. When buzz sound can be heard in the vicinity of AV circuit.
Check if there is any short-circuit on the rectifying diode and the circuit in each rectifying circuit of the secondary side, Check if there is any short-circuit on the rectifying diode and the circuit in each rectifying circuit of the secondary side,
and service it if defective. (D1003, D1006, D1008, D1016, D1030, IC1003, Q1002, Q1004, Q1011, Q1014, Q1020) and service it if defective. (D1003, D1006, D1008, D1016, D1030, IC1003, Q1002, Q1004, Q1011, Q1014, Q1020)
FLOW CHART NO.5 FLOW CHART NO.5
-FL is not outputted. -FL is not outputted.
Is -24V voltage supplied to the anode of D1003? Is -24V voltage supplied to the anode of D1003?
Check if there is any leak or short-circuit Check if there is any leak or short-circuit
on the loaded circuit, and service it if defective. on the loaded circuit, and service it if defective.

TROUBLESHOOTING

Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No No
See FLOW CHART No.2 <The fuse blows out.> See FLOW CHART No.2 <The fuse blows out.>
Check if there is any leak or shor-circuiting on the Check if there is any leak or shor-circuiting on the
No No
primary circuit component, and service it if defective. primary circuit component, and service it if defective.
(Q1001, Q1003, T1001, D1001, D1002, D1004, (Q1001, Q1003, T1001, D1001, D1002, D1004,
No No
D1005, D1011, C1003, C1005) D1005, D1011, C1003, C1005)
No No
Check each rectifying circuit of the secondary circuit Check each rectifying circuit of the secondary circuit
and service it if defective. and service it if defective.
No No
Check POWER button (SW2101) and their Check POWER button (SW2101) and their
periphery, and service it if defective. periphery, and service it if defective.
No No
Check CHG+3.3V line and service it if defective. Check CHG+3.3V line and service it if defective.
See FLOW CHART No.2 <The fuse blows out.> See FLOW CHART No.2 <The fuse blows out.>
Check the presence that the rectifying diode or Check the presence that the rectifying diode or
circuit is shorted in each rectifying circuit of circuit is shorted in each rectifying circuit of
secondary side, and service it if defective. secondary side, and service it if defective.
No No
Check IC1001, IC1006, D1015 and their Check IC1001, IC1006, D1015 and their
periphery, and service it if defective. periphery, and service it if defective.
No No
Check D1003 and periphery circuit, and service it Check D1003 and periphery circuit, and service it
if defective. if defective.
19
DVM-2845CI