Running Plu Reports - Royal 600sc Instruction Manual

Running PLU Reports

The PLU report shows the quantity and cost of each PLU Number rung up.
Only PLUs that had sales will print.
Important
A PLU Reading must be closed out in the Z position.
To print a PLU report
1 Put the Z or PRG key in the Mode key slot and turn it to the X or Z
2 If you are prompted for a Manager Password, type the password number
3 Press the PLU key.
To print a PLU sales report, according to an assigned Department number
range
1 Put the Z key or the PRG key in the Mode key slot and turn it to the X
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, specify the Starting Dept Number. It
4 Enter the Ending Dept Number as 2 digits.
5 Press the PLU key. The sales history for the PLUs assigned to the
Alpha 600sc User's Guide
position.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
position.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
must be 2 digits; for example 01.
departments in the specified range prints.
Running Management Reports
83