Ringing Up Sales With The Barcode Reader; Using Training Mode - Royal 583cx Instruction Manual

Chapter 6: Ringing up Sales and Using Training Mode

Ringing up Sales with the Barcode Reader

You can also ring up sales using the optional barcode reader. Before you
can ring up sales with the barcode reader, the UPC symbol must be
programmed into the cash register with the barcode reader. For more
information, see Programming PLUs with the Barcode Reader on page 49.
To ring up sales with the barcode reader
1 Put the REG key in the Mode key slot and turn it to the REG1 or REG2
2 Put the barcode reader light over the UPC symbol, about ½ inch or
3 Press the button under the scanner. The barcode scanner makes a beep
4 Continue using the barcode scanner to scan UPC symbols until you are
5 When you are done, press the Amount Tend Total key. The cash drawer
6 Make any change needed and place the money you are given in the cash
7 Close the cash drawer.
8 Give the customer the receipt, if you set the cash register to print

Using Training Mode

We provide examples to help learn how to use this cash register. For
information about the examples, see Examples on page 90. Using the
examples can help you learn to use the cash register and the available
features.
You can start Training mode at any time because it does not record
activity in the machine totals.
When you are using the cash register in Training mode, you cannot use
any of the operations in the PRG, X, or Z modes. The transaction
numbers and amounts do not count in the Register mode until you stop
Training mode.
When the cash register is in Training mode, asterisks **** print instead
of transaction numbers. When you stop Training mode, the transaction
64
position. You are ready to ring up a sale.
closer above the UPC symbol on the product to read the UPC symbol
properly.
sound and the item appears on the display.
done.
opens and the receipt or journal prints.
drawer.
receipts. You are ready to ring up another sale.
Alpha 583cx User's Guide