Table of Contents
Advertisement
3. Insert clip # 2 (the shorter clip) into the center hole on the backside of
the vent mount and move the clip to position (B) on the right as shown
in figure 23.
4. Insert the positioning arm in the lower holes (C) on the back side of
the vent mount as shown in figure 23. Be sure the longer end of the
positioning arm is positioned towards the bottom of the mount as shown
in figure 23.
Note: An extra #2 short clip has been included to provide
additional mounting options.
5. Attach the vent mount to the air vent by sliding clips #1 and #2 in
between slots on the center air vent as shown in figure 24.
6. Adjust the angle of the positioning arm to insure the best possible
view of the screen.
Figure 23
Figure 24
Page
60
Advertisement
Table of Contents
