8
Getting Started with Your GPS System
Please note: After a route is created, the GPS receiver needs to be
enabled before navigation can begin. (See section 10.1)
8.1
Opening & Viewing a Map
1) Tap File
2) A list of all available maps in the GPS system memory will be
listed. To list the maps stored on your memory Card double tap on
the folder that says "Card".
3) Double tap on the desired map.
Note: Steps 1 through 3 can be repeated to open multiple maps.
Under normal driving situations you may need to open several
maps. The default setting is 5 maps. You can however, open up to
10 maps for longer trips. To give your GPS unit the ability to open
up to 10 maps, go to the Tools menu on the GPS unit and select
Options. (See section 9.4.1)
Open
Page
26